I was settled for TV time, but my LG TV won’t turn on. Using the remote control and the power button itself, there’s still no luck. The TV still refused to turn on.
I proceeded to examine the cables and connected devices to the TV, and tried more troubleshooting steps I will share with you here. Here’s a spoiler: I was able to fix and turn on LG TV!
Fix LG TV Won’t Turn On
The best way to fix LG TV won’t turn on is to reset the TV. To reset your LG TV, unplug your TV from the power socket. Wait 60 complete seconds after unplugging your TV. Press and hold the power button for 30 seconds with the TV unplugged. Reconnect your LG TV’s power after the 60 seconds have passed, and it should function.
Other than that, check your remote control, reset the remote, and check your cables.
Reasons Why Your LG TV Won’t Turn On
If your LG TV suddenly stopped turning on, here is a rundown of some of the most likely causes of your LG TV’s inability to power on:
Note: Before attempting to resolve the issue, take a few moments to check for these common errors, as it can save you time and provide more insight into what needs to be addressed.
- The power supply is faulty – This is one of the most common reasons for a TV not turning on. Sometimes, it is not the fault of the device but the power supply itself. Take a look at the power cord and check if it’s securely plugged into the wall socket or surge protector. If nothing happens when you plug it in, then that could be an indication of power supply failure.
- Wires are broken or frayed – Check the wires and cables, especially the connection between your TV and power outlet. If you find any frayed or broken wires, replace them before trying to turn on your LG TV again, as it can lead to an electric shock.
- The firmware is not up to date – Outdated firmware can also be a major culprit for causing an LG TV to not function properly. When the firmware of your LG TV is not up to date, it can prevent the device from turning on. Updating the software usually resolves this issue. Check your owner’s manual for instructions on how to do this.
- Hardware failure – It’s not uncommon for hardware to fail, and most of the time, it doesn’t happen without warning. If your LG TV doesn’t turn on, it could be a sign that one of its components has malfunctioned. It’s best to get the device checked by a professional if you suspect this might be the case.
- Power failure from the service provider – Most of us rely on a network or cable provider to watch TV, and when they suffer power failure, it can result in our LG TVs being unable to turn on properly. If you live in an area where there are frequent power outages, check if your service provider is having any difficulties before looking for other solutions.
- Sensors are blocked – Make sure nothing is covering the TV and remote’s sensor, or the TV won’t respond to the control. It’s because infrared light rays control the on/off switch. Also, when using the remote, keep your hand away from the top.
- Switchboard is faulty – If the switchboard of your home or office has a faulty fuse, it can prevent power from being supplied to your LG TV, and you may experience trouble turning it on. Check if the switches are functioning properly with another device and if they’re not, have them replaced as soon as possible.
5 Quick Fixes if the LG TV Is Not Turning On
Seeking professional help is always the safest option, but there are a few simple strategies to troubleshoot and fix a non-functioning LG TV you can try out yourself before getting in touch with customer service. Here are some of the steps you can take:
#1. Unplug and Re-Plug Your TV
The first thing to do when your LG TV won’t turn on is to unplug it from the wall outlet and plug it back in after a few seconds. To ensure your television’s longevity, be sure to allow at least a minute of rest time before turning it back on. This simple act of resetting the power supply may be all it takes for your television set to start working again.
If your LG television boasts a detachable power cord, then give the following solution a shot:
- Unplug it from the rear panel and leave it unconnected for 60 seconds.
- After that time has elapsed, plug it back into the TV and press the power button.
- You may just be pleasantly surprised to find your screen illuminated with life once more!
If this doesn’t work, try using another power outlet as well as changing out the power cord itself if possible. It may also be helpful to plug it into an outlet controlled by a different circuit breaker or fuse.
#2. Check Your Remote Control Batteries
It might seem silly, but often times the issue is as simple as needing new batteries in your remote control. Make sure both batteries are inserted correctly into the remote and that they have enough charge left before trying other troubleshooting steps.
If you don’t have any spare batteries around, try pointing another remote control at the TV to see if its infrared signal is recognized—you never know!
#3. Reset the Remote
If the batteries are operating properly, there is one more adjustment you must try to be sure your remote control is functional. Anything wrong with the remote itself should be resolved with a reset.
To reset your remote control:
- Open the back panel of the remote and remove its batteries.
- Subsequently, press and hold the power button for twenty seconds.
- Place batteries back into the device and secure its back panel again.
- Try out your newly reset remote with a TV to see if it works!
#4. Check Your HDMI Cables
If none of the previous methods worked, then take some time to check all of your HDMI cables for any visible damage, like loose connections or exposed wires, that could be causing disruption with the signal being sent from device to device (or from device to TV). Try removing each cable one at a time and plugging them back in again for good measure—sometimes, simply reinserting them does the trick!
#5. Reset the TV Manually
If all else fails, it may be time to reset the TV itself. Like any other device, over time, settings can get corrupted and need a reset. To reset your LG TV:
- Unplug the TV from the power source and hold down the power button on the television itself for 30 seconds.
- Leave the TV disconnected for another two minutes before plugging back in.
- Attempt a restart with just the TV’s power button (not the remote).
If nothing works from here, then it’s a good idea to take your LG TV to the service center or contact their customer care team for assistance. With their expert troubleshooting, you can be sure that your LG TV will soon be up and running again!
Frequently Asked Questions
How to Reset an LG Remote Control?
To reset your remote control: open the back panel of the remote and remove its batteries. Subsequently, press and maintain pressure on the power button for twenty seconds. Place new batteries in the device and secure its back panel again. Try out your newly reset remote with a TV to see if it works!
No, there is no reset button for LG TVs. To reset your LG TV, unplug the device from its power source and hold down the power button on it for 30 seconds. Leave it disconnected for a minute or two before plugging back in and attempting a restart with just the TV’s power button (not the remote).
How Do I Force Restart My LG TV?
Press the Home Button to display the Menu, scroll down to Settings, select General, and choose Reset. Next, follow all on-screen instructions until you reach a confirmation page where entering your television’s password will then enable you to hit Restart for smooth sailing ahead! Usually, the default password is 0000 or 1234.
How Do I Know if My TV Fuse Is Blown?
If your TV isn’t turning on and no lights appear when you press the power button, then it’s likely that the fuse has been blown. To check if this is the case, locate the fuse box in your house and inspect any fuses connected to your television. If a fuse appears burnt or melted, then it’s likely that it needs to be replaced.
No matter how handy you are with technology, there may come a time when even the most experienced among us will find themselves asking, “why won’t my LG TV turn on?”
Fortunately, there are several things you can do yourself before calling in reinforcements—like unplugging and plugging back in your TV or checking all of your HDMI cables—to get it up and running again in no time flat! So go ahead and give these tips a shot—we promise they won’t let you down!